ALPINAflex   the most important technical data

ALPINA enclosure type 2

Flat section for the installation with an overlap in the light. A frame depth of at least 40 mm is required. The width of the blind is 50 mm. Installation with an oblong hole or hold clip. Lateral attachment with plastic blinds.

Mainly for application in the roof area. This blind can also be used in transom and mullion facades.

ALPINAflex lateral guides

Depending on the type of skylight, different lateral guides become necessary. You can order according to the window type.

The matching lateral guide is determined and delivered by ALPINA

Light filter / Reflector

You can choose between different films and colour tints (Aubergine, silver, bronze, black or grey), from shading to transparent films with different hue levels.

We have also diverse textile hangings on offer, which can be installed as well. Picture with an optional twin pulley-system.

The film A07 is also available in a pleated and flame resistant version (Llumar). Unembossed films and textile hangings on request. The look-through capability has also been considered during the rating of "Glare shield". Film A07 doesn't have this characteristic, even though it offers the best protection against the sun.

Drive

Manual operation through winding shaft and spring balancer drive, by draw shackle right at the end rod or with the aid of an operation rod.